One use, one inspection for shelves

a. The use of shelves should prevent top heavy and bottom light: the principle of placing light goods at the top and heavy goods at the bottom should be followed.
b. Use to prevent overloading: The weight of each layer of goods stored must not exceed the maximum load-bearing capacity of the shelf design.
c. To prevent excessive height and width during use: The shelf height and width have been restricted, and the size of pallets and goods should be slightly smaller than the net space by 100mm.
d. Shelves should be used to prevent impact: Forklifts should be handled with care during operation.
e. When using shelves with goods placed above, operators should try not to directly enter the bottom of the shelf.
f. When using shelves, it is necessary to prevent the use of non-standard pallets on the shelves, and the Sichuan style bottom is the most suitable.
1. Check the usage of the shelves and follow the instructions for using the shelves;
1. Check whether the crossbeam, stopper, and accessories are damaged, and correct the straightness of the column;
2. Check the size and type of all stored goods;
3. Check whether the appearance configuration is consistent with the original reality;
4. Check the deformation of the shelves;
5. Check if the safety pin is complete and undamaged;
6. Check the weight of the palletized goods;
7. Check if the ground expansion bolts that fix the columns are loose;
8. Check foot protection and other protective measures;
9. Check if the ground is sinking or damaged;
10. Inspection personnel should truthfully record the actual situation and submit written inspection results to the department head. Professional shelving personnel should be dispatched to eliminate hidden dangers